Table of Contents

Installing a Guide Upgrade Conversion Kit

Upgrading your band saw with a guide conversion kit is a simple and effective way to enhance its performance and cutting accuracy. Guidekits.com offers a wide range of guide conversion (retrofit) kits compatible with many popular saws, including both upper and lower guides. Customers have reported significant improvements in cutting precision after installing these kits. To choose the best kit for your needs, visit https://guidekits.com/shop/

Getting Started

Before diving into the installation process, ensure you have the necessary tools for the job. You will need a screwdriver, pliers, and potentially an adjustable wrench, depending on your specific kit. Safety goggles are also essential when making adjustments or replacements on your machine. For more information on safety and installation, check out the Guidekits.com FAQ section at https://guidekits.com/frequently-asked-questions/.

Removing the Old Guides

With your tools ready, begin by removing the old guides from your machine. Unscrew the screws holding them in place and carefully remove them from their housings. Clean off any excess dust or debris around the installation area with a soft cloth or brush, as this will facilitate the new guide installation. For detailed instructions, visit https://guidekits.com/installing-a-guide-upgrade-conversion-kit/.

Installing the New Guides

Now, install your new guide conversion kit from Guidekits.com, which comes with the assurance of quality products and same-day free shipping. Line up each guide with its designated holes in the housing and secure it with the provided screws. Ensure each guide is snugly but not overly tightened. Use a level to verify proper alignment before turning on the machine. Finally, insert and tighten all bolts with an adjustable wrench, taking care not to overtighten, which could damage your machine and new guides.

Testing It Out

Test your newly installed guide conversion kit by turning on your machine and adjusting its speed accordingly (usually between 1-3 RPMs). Slowly lower the blade onto some scrap wood or cardboard, ensuring proper tracking before cutting anything valuable. If all looks good, you have successfully installed your guide conversion kit! For further guidance on band saw blade selection, read https://guidekits.com/flex-back-vs-hard-back-which-band-saw-blade-is-best-for-your-woodworking-projects/.

In just a few simple steps, you can upgrade your band saw with a guide conversion kit from Guidekits.com, saving money and increasing safety when working with power tools like band saws. Don’t forget these easy DIY upgrades when considering band saw enhancements or part replacements. For more information about Guidekits.com, visit https://guidekits.com/about/ or contact our customer support team at https://guidekits.com/contact-us/

Central Machinery 14″ Guide Upgrade Kit

$149.95
Upgrade your bandsaw with our central machinery band saw blade guide. Designed meticulously for the discerning woodworker, this upgrade ensures smoother cuts and prolonged blade life.
  • Precision Sealed Ball Bearing Roller Guides: Reduces blade friction for smoother operations.
  • Improved Cutting Accuracy: Achieve consistent and precise cuts every time.
  • Versatile Adjustments: Compatible with blade widths from 3/16" to 1”.
  • Perfect Fit: Tailored for Central Machinery 14" saws with a 7/8" diameter upper mounting post.
Note: This guide is not compatible with machines with a 3/4" post.
Add to cart

Delta 14 Guide Upgrade Kit

$149.95
Introducing the Delta 14 Guide Kit, a high-quality conversion kit designed to elevate your saw's performance and precision. Experience smoother and more accurate cuts with this essential upgrade for your woodworking needs.
  • Precision sealed ball bearing roller guides
  • Reduced blade friction for smoother operation
  • Improved cutting accuracy
  • Adjustable for blade widths from 3/16" to 1"
Upgrade your saw with the Delta 14 Guide Kit and experience a significant boost in performance. This conversion kit is equipped with precision sealed ball bearing roller guides that drastically reduce blade friction, ensuring a smoother cutting experience. The improved cutting accuracy offered by the Delta 14 Guide Kit is unmatched, while its adjustability accommodates blade widths ranging from 3/16" to 1". Enhance your saw's capabilities and achieve professional-quality results with this essential woodworking accessory. Get your Delta 14 Guide Kit today and transform your saw into a precision cutting machine.
Add to cart

Delta 14″ Hex Post Guide Upgrade Kit

$179.95
Elevate your saw's performance with the Delta 14" Hex Guide Conversion Kit, designed exclusively for Delta 14" saws featuring a hexagonal upper guide support post. Experience enhanced performance and precision through the utilization of advanced sealed ball bearing roller guides.
  • Precision Sealed Ball Bearing Roller Guides: Our top-of-the-line roller guides significantly reduce blade friction, ensuring smoother operation and extended blade life.
  • Improved Cutting Accuracy: The Delta 14" Hex Guide Conversion Kit enhances your saw's cutting precision, delivering exceptional woodworking results for every project.
  • Adjustable & Compatible: Effortlessly adapt the roller guides to accommodate blade widths ranging from 3/16" to 1", offering versatility for various cutting tasks.
Upgrade your Delta 14" saw today with the Hex Guide Conversion Kit and enjoy superior performance, enhanced accuracy, and the flexibility to tackle any woodworking challenge. Don't wait - transform your saw now!
Add to cart

Delta 14″ Hex Post Guide Upgrade Kit with Riser Block

$189.95
Del 14 Hex Kit With Riser Delta 14" Hex Riser Block conversion kit is for use with Delta 14" saws that have a hexagonal upper guide post and a riser block installed.
  • This kit updates your saws performance through the use of precision sealed ball bearing roller guides.
  • This gives your saw with reduced blade friction and improved cutting accuracy
  • Adjustable for blade widths from 3/16" to 1"
 
Add to cart

Delta 14″ Riser Block Guide Upgrade Kit

$169.95
Introducing the Delta 14" Riser Block Guide Kit, a game-changing upgrade for your Delta 14" saws with a riser block installed. Enhance your saw's performance and achieve precise cuts with this essential kit.
  • Compatibility with Delta 14" saws equipped with a riser block
  • Performance upgrade through precision sealed ball bearing roller guides
  • Reduced blade friction for smooth operation
  • Improved cutting accuracy for consistent results
  • Adjustable for blade widths from 3/16" to 1"
Upgrade your woodworking experience with the Delta 14" Riser Block Guide Kit. Designed specifically for use with Delta 14" saws that have a riser block installed, this conversion kit significantly enhances your saw's performance. By employing precision sealed ball bearing roller guides, this kit reduces blade friction, allowing for smoother operation and enhanced cutting accuracy. Furthermore, the adjustable guide accommodates blade widths ranging from 3/16" to 1", offering versatility and adaptability for various woodworking projects. Invest in the Delta 14" Riser Block Guide Kit to optimize your saw's performance and achieve the precise cuts you desire.
Add to cart

Delta 20″ A/B Guide Upgrade Kit

$199.95
  • Delta 20 A/B Guide Kit
  • The Delta 20 A/B kit is for older model band saws that have guides that mount perpendicular to the blade
  • This all bearing kit uses precision roller bearing guides to promote cooler running and longer blade life
  • The rugged guides are perfect for general work and resawing
Add to cart